SPECIFICATIONS
|
Power Range |
1.5KW/2HP (20 stage) |
|
Version |
180-240V 1Ph, 50Hz in water filled, 140-240V 1Ph, 50Hz in oil filled |
|
Speed |
2800rpm |
|
Flow Rate |
0.2-1.25 lps |
|
Total Head Range |
80 meters |
|
Outlet size in inches |
1" & 1.25" |
|
Degree of Protection |
IP 68 |
|
Direction of Rotation |
CCW -1 Ph |
|
Maximum Outer Diameter |
76mm |
|
Type of duty |
S1 (Continuous) |
| Material of Construction | |
|---|---|
| Motor Body | Stainless Steel |
| Stator | Vacuum Impregnated with class F insulations |
| Rotor | Aluminum pressure die cast |
| Winding | Enamelled copper wire with class F insulations |
| Bearing | Heavy duty angular contact bearing/ ball bearing |
| Bowl | High grade Noryal |
| Wear Rings | High quality abrasion resistant P.U. |
| Seal | Mechanical Seal |
| Diaphragm | Adequately sized to accommodate pressure difference of oil inside the motor and prevent loss of oil |
| Impeller | High quality abrasion resistant Noryal & dynamically balanced. |
| Shaft | Stainless Steel of adequate diameter to ensure rigidity and ground to close tolerances. |
| Suction Casing | Provided with perforated Stainless Steel Strainer and adequately sizes to allow the water to be sucked in with minimum friction. |
| Cable Sealing Arrangement | Designed so that no bore well water with sand can enter the motor. |
